[dorkbotpdx-announce] Arduino Cult Induction (Rev-1) Followup Part 1.

[Donald Delmar Davis]

First of all I was really happy that so many people showed up and got  
as far into their construction as they did.

27 people and only 1 dead board.

Now I know that getting all of that done in under 3 hours was a little  
ambitious. (The pacing was initially based on the photo session at http://www.flickr.com/photos/7175086@N05/sets/72157604783725339/ 
  which took 20 minutes from start to finish)

For those of you who were unable to finish the cable, Jacob Helwig has  
provided a clear picture of a working cable at

http://www.flickr.com/photos/jacob_helwig/2485841122/in/set-72157605009944742

<img src=http://farm3.static.flickr.com/2386/2485841122_d52df893c4.jpg?v=0 
 >

He also provided this pinout sumary .

Pins -> USB
1 -> 2 (Rx)
2 -> 1 (Tx)
3 -> 7 (+5V)
4 -> 4 (Reset)
5 -> 3 (Ground)

Pin 1 is on the bottom (the side of the programmer with the leds --  
red wire in jacob's picture) on both ends.

I am looking to have a second session for software as soon as I can  
get a room scheduled (this sunday or some sunday soon). In the mean  
time you can download the software (http://www.arduino.cc/en/Main/Software 
) and poke around at the main site (http://www.arduino.cc/). I will  
also be at the bi-weekly dorkbot meeting at the Lucky Lab NW tomorrow  
between 7 and 10 and will bring a soldering iron if anyone gets stuck  
or wants to finish up their.

You can also email me if you need anything.


Don.

DDelmarDavis at gmail.com