[dorkbotpdx-blabber] [GroupOrder] Addendum (was Mouser Shipping)
Mr.T
drtwist at aracnet.com
Mon Nov 17 15:57:52 EST 2008
As an FYI, there are currently no other Digikey orders, unless someone
else decides to jump on the digikey wagon, you'll be the only one on it
_____________________________
Drtwist:
drtwist at aracnet.com
On Mon, 17 Nov 2008, Donald Delmar Davis wrote:
> Also,
>
> 17 25 LM386N-4-ND IC AMP AUDIO POWER LOW V 8-DIP 0
> 0.74240 $18.56
>
> All parts digikey for the TDI stuff. Sorry about the cross post.
>
> Don
>
>
> On Nov 17, 2008, at 12:15 PM, Donald Delmar Davis wrote:
>
> > Eric,
> > I tried to send this last night.
> > This is for the workshop (TDI)
> > I will have a paypal and an order for my own stuff stuff
> >
> > 1 30 751-1262-5-ND OPTOCOUPLER 1CH 10MBD 8DIP 0
> > 1.27800 $38.34
> > 2 100 160-1704-ND LED 3MM HI-EFF RED TRANSPARENT 0 0.05800
> > $5.80
> > 3 100 754-1254-ND LED SS 3MM 640NM RED WTR CLR 0 0.06110
> > $6.11
> > 4 40 W02M-BPMS-ND IC BRIDGE RECT 1.5A 200V WOM 0 0.29800
> > $11.92
> > 5 100 CP-2350-ND CONN DIN 5 PIN FEMALE PCB 0 0.48000 $48.00
> > 6 30 CP-102AH-ND CONN PWR JACK 2.1X5.5MM HIGH CUR 0 0.36400
> > $10.92
> > 7 100 1N751ACT-ND DIODE ZENER 5.1V 0.5W 5% DO-35 0 0.04230
> > $4.23
> > 8 30 478-4764-ND BUZZER PIEZO ELEMENT 4.6KHZ 30V 0 0.66000
> > $19.80
> > 9 100 CF1/41M5%RCT-ND RES 1M OHM 1/4W 5% CARBON FILM 0
> > 0.01320 $1.32
> > 10 30 LM7805CT-ND IC REG 1A POS -40-+125DEG TO-220 0 0.36000
> > $10.80
> > 11 200 RHM220ACT-ND RES 220 OHM 1/8W 5% 0805 SMD 0 0.02340
> > $4.68
> > 12 25 AT90USB162-16AURCT-ND IC AVR MCU 16K FLASH 32TQFP 0
> > 3.15000 $78.75
> > 13 200 RHM10KARCT-ND RES 10K OHM 1/8W 5% 0805 SMD 0 0.01925
> > $3.85
> > 14 100 445-1370-1-ND CAP CER 4.7UF 10V Y5V 0805 0 0.07480
> > $7.48
> > 15 25 LM324NFS-ND IC OPAMP QUAD 0-70DEG C 14-DIP 0 0.31520
> > $7.88
> > 16 50 RHM1.20KCRCT-ND RES 1.20K OHM 1/8W 1% 0805 SMD 0
> > 0.02640 $1.32
> >
> > On Nov 17, 2008, at 9:14 AM, Mr.T wrote:
> >
> >> I prefer digikey overall for a number of reasons. First, anytime
> >> I.ve been
> >> in a customer service situation with them they've been accommodating
> >> almost to the point of obsequiousness. second, 99% of the time
> >> digikey'
> >> s packaging is 100% recyclable (almost none of mouser/newark's
> >> packaging
> >> is). Third, they always make their shipping deadline. plus they
> >> usually
> >> have the parts i want.
> >>
> >> I recently had mouser give me the run around on customer service too.
> >>
> >> but you're right, mouser's web interface is way better than digikey's
> >>
> >> -eric
> >> _____________________________
> >> Drtwist:
> >> drtwist at aracnet.com
> >>
> >> On Sun, 16 Nov 2008, dave madden wrote:
> >>
> >>> I got dinged for $28 on a $70 order from Mouser the other day.
> >>> Pissed
> >>> me off mightily, I must say. The reason for it was a partial rail
> >>> of
> >>> RJ11 connectors...no reason to ship them in a rail (other
> >>> connectors I
> >>> ordered at the same time were bagged), and if they had even cut
> >>> the rail
> >>> down a bit more carefully, it would have fit in their standard small
> >>> box. As it was, they sent me a huge box full of bubble wrap and
> >>> charged
> >>> me 4x the shipping I'd expect on an order that size.
> >>>
> >>> It was just stupid: they don't pocket any fee based on the
> >>> shipping, so
> >>> they wasted my money and annoyed a regular customer without making
> >>> any
> >>> extra for themselves. I wrote to Customer Service (snail mail, on
> >>> real
> >>> paper!). I wonder whether they'll reply.
> >>>
> >>> FWIW, I prefer the Mouser web interface, but I expect I'll be using
> >>> DigiKey much more in the future.
> >>>
> >>> d.
> >>>
> >>> _______________________________________________
> >>> dorkbotpdx-blabber mailing list
> >>> dorkbotpdx-blabber at dorkbot.org
> >>> http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
> >>>
> >>
> >> _______________________________________________
> >> dorkbotpdx-blabber mailing list
> >> dorkbotpdx-blabber at dorkbot.org
> >> http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
> >
>
>
More information about the dorkbotpdx-blabber
mailing list