[dorkbotpdx-blabber] Dragon / 168 / AVR Studio ?
Donald Delmar Davis
ddelmardavis at gmail.com
Tue Jun 9 16:47:31 EDT 2009
Did you look at the make file in the posting i did on this?
I am using avrdude which you may try to see if is an avr studio issue.
http://www.dorkbotpdx.org/blog/feurig/burning_a_bootloader_with_the_avr_dragon
Don
On Jun 9, 2009, at 1:17 PM, Hans Lindauer wrote:
> I tried the whole meeting last night to get my Dragon to burn
> Adaboot onto an ATmega168 using ISP, but didn't have any luck. I
> think I can rule out Vista as the culprit, because it does the same
> thing on XP at home.
>
> Has anyone had any luck with this setup?
>
> Here's what I did:
> Wired the Dragon as per http://support.atmel.no/knowledgebase/avrstudiohelp/mergedProjects/AVRDragon/SCKT3200A2.htm
> and socketed the chip
> In AVR Stuidio: connected to the Dragon on the USB port
> Left ISP Frequency at 1.000 MHz
> Selected ADABoot_168.hex from http://www.wulfden.org/downloads/code/arduino/ADABootLoaderR3_9D15.zip
> [ www.wulfden.org/downloads/code/arduino/ADABootLoaderR3_9D15.zip ]
> as my Flash Input HEX File
> Set low_fuses=0xff, high_fuses=0xdd, extended_fuses=0x00 as per
> append_2_boards.txt (from above archive)
> Set lockbit to 0x0f (per above), this one I'm not sure about at all
> Left all other parameters to default
> When I program the chip, I get the following messages and also an
> ISP Mode Error message popup.
> Getting ISP frequency parameters.. SD=0x03 .. OKOK
> Reading FLASH input file.. OK
> Setting device parameters.. OK!
> Entering programming mode.. FAILED!
> Leaving programming mode.. OK!
> Can someone please point me in the right direction here? I tried
> all of the lower ISP frequency settings. Also, I get the same
> errors if I try to erase the device.
>
> Thanks,
> -Hans
> _______________________________________________
> dorkbotpdx-blabber mailing list
> dorkbotpdx-blabber at dorkbot.org
> http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://music.columbia.edu/pipermail/dorkbotpdx-blabber/attachments/20090609/26c23aae/attachment-0001.html
More information about the dorkbotpdx-blabber
mailing list