[dorkbotpdx-blabber] LED breakout boards?

[Donald Delmar Davis]

Hans,

It sound like you need to design around a breakaway design your prices  
will go down significantly.
You should hit up monty for some advice.
Mr goodson you have any advice?

Don;

On May 12, 2009, at 11:34 AM, Hans Lindauer wrote:

> How tiny: as small as possible using a 3mm LED and a standard-sized  
> resistor, looks like maybe .3"x.5".  Or maybe a little bit longer,  
> with a mounting hole that could be broken away.
> How cheap: <= a quarter each.
> How many: I could use about a hundred.
>
> I went to Sunstone's site, and it looked like I could get something  
> made for somewhere in the neighborhood of 13 cents (15 cents with  
> the breakaway hole).  If I make 5000 of them.
>
> Anybody else in the market for these things?
>
> -Hans
>
> Eric Garner wrote:
>> How tiny? How cheap? How many?
>>
>> Sent from my iPhone
>>
>> On May 12, 2009, at 12:20 AM, Hans Lindauer  
>> <armatronix at sbcglobal.net> wrote:
>>
>>> Does anyone have a source for tiny, cheap PCBs that will accept an  
>>> LED,
>>> a resistor, and a pair of wires?
>>>
>>> Thanks,
>>> -Hans
>
> _______________________________________________
> dorkbotpdx-blabber mailing list
> dorkbotpdx-blabber at dorkbot.org
> http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://music.columbia.edu/pipermail/dorkbotpdx-blabber/attachments/20090512/4887aa3d/attachment.html