[dorkbotpdx-blabber] LED breakout boards?

[Eric Garner]

alternately you cold just use LED's with integrated resistors:

http://www.newark.com/jsp/search/productdetail.jsp?sku=40K0067&_requestid=78026

29 cents at qty 100



On Tue, May 12, 2009 at 1:02 PM, Donald Delmar Davis
<ddelmardavis at gmail.com> wrote:
> Hans,
> It sound like you need to design around a breakaway design your prices will
> go down significantly.
> You should hit up monty for some advice.
> Mr goodson you have any advice?
> Don;
> On May 12, 2009, at 11:34 AM, Hans Lindauer wrote:
>
> How tiny: as small as possible using a 3mm LED and a standard-sized
> resistor, looks like maybe .3"x.5".  Or maybe a little bit longer, with a
> mounting hole that could be broken away.
> How cheap: <= a quarter each.
> How many: I could use about a hundred.
>
> I went to Sunstone's site, and it looked like I could get something made for
> somewhere in the neighborhood of 13 cents (15 cents with the breakaway
> hole).  If I make 5000 of them.
>
> Anybody else in the market for these things?
>
> -Hans
>
> Eric Garner wrote:
>
> How tiny? How cheap? How many?
>
> Sent from my iPhone
>
> On May 12, 2009, at 12:20 AM, Hans Lindauer <armatronix at sbcglobal.net>
> wrote:
>
> Does anyone have a source for tiny, cheap PCBs that will accept an LED,
>
> a resistor, and a pair of wires?
>
> Thanks,
>
> -Hans
>
> _______________________________________________
> dorkbotpdx-blabber mailing list
> dorkbotpdx-blabber at dorkbot.org
> http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
>
>
> _______________________________________________
> dorkbotpdx-blabber mailing list
> dorkbotpdx-blabber at dorkbot.org
> http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
>



-- 
--Eric
_________________________________________
Eric Garner