[linux-audio-user] M-Audio cards, XLR inputs question

Joseph Dell'Orfano fullgo at dellorfano.net
Sun Feb 6 19:42:55 EST 2005


The 1010LT has 2 balanced XLR inputs and the remainder are unbalanced. I
have this one and it is great for what I need. I have a stereo preamp
hooked into the XLR inputs. 

The 1010 appears to have 8 balanced in/out using TRS connectors instead
of XLR inputs. I understand that this is a very nice board. Both cards
are well supported with ALSA.

Good luck. Please post some recordings!!

-Joe D

On Sun, 2005-02-06 at 18:11, Phil Sexton wrote:
> Hi listmembers,
> Looking over the info here:
> http://www.m-audio.com/products/en_us/
> It looks as if the Delta 1010LT has 2 XLR inputs, whereas the Delta 1010
> only has 1/4" jacks.
> http://www.m-audio.com/images/en/callouts/big/delta_1010.jpg
> I have 1" condenser mics (AKG 3000B) which require phantom power.  I
> assume neither card provides it.
> Can owners of these cards confirm my assumptions?  What recommendations
> would you give for me to purchase.
> We have a 5 member band, two instruments have built in pickups, the harp
> has a 1/2" condenser mic (I'm not sure if it is battery powered or
> requires phantom power), all of the other instruments need miking
> (Uilleann, Great Highland and shuttle bagpipes, anglo concertina,
> fiddle, whistles, flutes, bodhran, bones and egg rattle).
> I am building a box with Gentoo Linux intended for recording and
> editing.

More information about the linux-audio-user mailing list